This double column vertical lathe is used to turn the big disc for
cradle type laying-up machine and the capstan of the stranding
machine. This machine can turn and burnish the grooves to protect
the cable and keep the same hual-off force.
Large planer type milling machine, which is used to mill the main
chassis of the main stranding cage and take-up & pay-off
chassis. The large planer type milling machine can ensure that each
flat surfaces are machined in one time to keep the homogeneous
height distribution of the surface machined by the milling machine.
All of these will enable the whole machine runs smoothly.
Dynamic balancing machine is the key producing equipment to produce
the fast running wire and cable equipment, especially the rigid
frame stranding cage and tubular stranding cage. The machining
process of the stranding cage will lead to different eccentric
force, which will be detected by the dynamic balancing machine.
After corrected the stranding cage will easily meet the high speed
rotation requirement and increase the service life.
Electric annealing furnace is indispensable to produce wire and
cable making machine, particularly the rigid frame stranding
machine and tubular stranding machine. The internal stress of the
main stranding cage is great when it's welded together. The
internal stress is released strongly by heat treatment. This
produce process will ensure that the stranding cage without
deformation and fracture to improve internal quality.
Tubular strander stranding with back twist, for 1+6 Bobbin, 1+12
Bobbin copper / aluminium round & compact conductors and steel
We also customise this tubular type stranding machine in accordance
with customers' requirements.
The stranding machine is designed with, 1+6 Bobbin, 1+8 Bobbin,
1+12 Bobbin, Cage or accoding to customers' requirements.
Bobbin: 400 mm, 500 mm, 630 mm, 800 mm, 1000 mm, 1250 mm DIN 46397
Standard / Modified.
Tubular stranding machine, Cages supported on good bearing on both
ends. The big main bearing is pump-oil forced lubrication bearing.
The tubular cage is annealed, which will reduce the internal stress
and increase service life.
High efficiency and speed, low noise, long life. 200 / 1+6 Cage max
speed 1400 RPM.
Bobbins locked with mechanical pintles: one is movable and one is
fixed, or Bobbin is fasten on the axis by latch.
Different braking device for bobbin tensioning.
Disk type Pneumatic brake for Cage.
PLC Equipped, optional.
|Model (Tubular Stranding Machine)||JGG-400||JGG-500||JGG-630|
|Diameter of single wire||Copper||φ1.2-2.6 mm||φ1.4-4 mm||φ2-7 mm|
|Aluminum||φ1.8-2.6 mm||φ1.8-4 mm||φ2-7 mm|
|Maximum stranded conductor OD||φ7 mm||φ10 mm||φ12 mm|
|Stranding Pitch||6 Bobbin Stranding Cage||37-281 mm||44-338 mm||82-620 mm|
|12 Bobbin Stranding Cage||37-281 mm||44-338 mm||82-620 mm|
|18 Bobbin Stranding Cage||44-334 mm||44-338 mm||82-620 mm|
|Rotating Speed||6 Bobbin Stranding Cage||600 r/min||600 r/min||400 r/min|
|12 Bobbin Stranding Cage||600 r/min||500 r/min||300 r/min|
|18 Bobbin Stranding Cage||450 r/min||400 r/min||230 r/min|
|Capstan||Capstan Wheel Diameter||φ600 mm||φ800 mm||φ1000 mm|
|Maximum Haul-off Force||3T||5T||5T|
|Motor Power||22 KW||30 KW||37 KW|
|Bobbin Size||400 mm||500 mm||630 mm|
|Center Payoff Bobbin||400 mm||500 mm||630 mm|
|Take-up Bobbin||1250 mm||1600 mm||2000 mm|